Mixing 3M pps liners and cups

Any questions about tools or supplies. Post your compressor/gun questions here.



Non-Lurker
Posts: 8
Joined: Fri Apr 19, 2019 4:11 pm

Country:
Mexico
PostPosted: Sat May 18, 2019 6:48 pm
Hi guys,

Recently I started reading a little about the 3M pps system, but I haven't found a comprehensive source where I can find some details, for example if I can use a standard liner with a large cup or so.

I'm not using the 2.0 because I haven't found the presurised cup for the fuji gravity cup gun (not using the older version either, just reading about). Found tons of information about, but not about the parts or if I can just buy one cup and use other liners according to the amount of paint.

What I've found is that a cup is needed for each size, but the information isn't very specific in this matter.

Can anyone point me out to some sources for reading about this?

Thanks in advance.

User avatar

Top Contributor
Posts: 1745
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Mon May 20, 2019 8:07 am
yes the cups are specific to the liner, you might be able to use a medium liner in a large cup, i wouldn't recommend it.
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal

Return to Tools and Supplies

Who is online

Users browsing this forum: No registered users and 65 guests