AutoBody101.com

I've got a set of Devilbiss Starting line hvlp guns to learn painting and needs some economical cups. Looked online only found one plastic cup $69.95. Anyone?

Mixing cups or spray gun cups?

these cups??

https://www.google.com/search?ei=i31DXa ... CAo&uact=5

Devilbiss has variety of size cups for those gun's.
https://www.autorefinishdevilbiss.com/p ... -cups.aspx

Your probably gonna want a new seal kit, I would.
https://www.autorefinishdevilbiss.com/p ... parts.aspx
Devilbiss guns like fresh seals, You can get away with reusing them for a while in between cleanings but they will require replacing eventually if not frequently depending on use.
How careful you are removing them, cleaning them and how careful you are too not over tighten them.
especially the Needle packing's! keep it lubed not too tight not too loose.
You want it tight enough not too leak but you want the needle to slide without binding on the Needle so it slides freely. They are known to drip from the Needle packing if not carefully cared-for.

If this is a brand new set make sure to disassemble and clean them thoroughly before use!

Spray gun World is a good place for cups.

http://www.spraygunworld.com/Informatio ... /cups.html

Thanks, guys I was thinking more along the lines of cheap plastic-type for this set. I dug out a Finish Line I've had stuck back in my cabinet for years, almost forgot I had it. It has a 1.4 & 1.6 cap and a one-quart ss cup so guess I'll go with it.