Installing 2nd stage filter doors

Any questions about tools or supplies. Post your compressor/gun questions here.



Fully Engaged
Posts: 183
Joined: Sun May 04, 2008 4:20 am
PostPosted: Sat Jan 18, 2020 12:33 am
So,

My predicament i get dust in my paint at work in my own made paint booth, clearly its not good enough and i work in a super dusty enviroment.

Looking at other paint booths and asking people, the concensus has been to create an inner wall to my paint booth with a second stage set of filters, so the original filters i have do the bulk of the work and the inner wall filters to the extra fine filtering stuff, also creates a buffer area for me to enter and exit the paint booth.

Current design, cross flow booth working on negative pressure from the exhaust fan draw.

If i make an inner wall where my air is being drawn across the booth and out, i have the option of making the top of the wall tilted and putting the filters across the top rather than a flat wall and across the middle.

Question. Is there any advantages to drawing the air in a negative pressure cross flow design from the roof or the centre or the floor of the intake side

Steve

Return to Tools and Supplies

Who is online

Users browsing this forum: No registered users and 8 guests