Re: 70psi at compressor regulator to get 23psi at gun?
Posted: Sun Jun 28, 2020 7:54 pm
tomsteve wrote:something to think about:
33 gallons is 4.4 cubic feet.
oiless compressors run HOT. HOT= major moisture problems.
I have a small water separator at the gun and have this at the compressor:
https://smile.amazon.com/gp/product/B07 ... UTF8&psc=1
The blue desiccant beads do turn pink after each day of spraying so I make sure to start with blue beads. Not good enough to remove most moisture? I am only planning on spraying primer (poly first and then urethane). I am not going to spray the base or clear, bringing the car to the pros for that.