I wish I could have found this b4 I bought mine! This is a Killer deal from a well known supplier, It wont get much cheaper than this guys.
Those Chinese they will literally work for penny's how America is going to compete on an international level is beyond me? The Race to the bottom is on again! With a one world economy dragging us down forcing Americans to compete with third world labor.
https://www.jegs.com/i/JEGS/555/81241/10002/-1
Of course You get what you pay for!
Brand new Rotisserie $899!!!!!!!!!!!!!
9 posts
• Page 1 of 1
Top Contributor
Posts: 6216
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Chris
|
|
Top Contributor
Posts: 6216
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
I have seen that done before That's BRAVE!!!!!
I cant say I would try that. I would think Anyone's wife would cave to $899 over doing that lol at least I would hope so? If not? Dam Dude! your not Loved very much are you? Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
It's not mine.
Proves though, that some of what you see is way over-engineered. The one you linked is probably better suited to a shop doing lots of different cars where all the adjustability can be used. I had a stand for bonnet and guards which was similarly built. Thought it was a bit light but it did the job admirably. Chris
|
|
Top Contributor
Posts: 6216
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Jegs broke the link to that post try this one?
https://www.jegs.com/i/JEGS/555/81241/10002/-1 I myself got this one by Titan Its ok cant complain for a cheapy China built unit it holds my car up and its rated for 4500 lbs! https://www.mile-x.com/titan-rot-4500-a ... -capacity/ I did not buy it through that company though I got it from a Local distributor took them a couple weeks to get it in for me but I did get it. I paid $1200, $1400 with all the add on's for different set ups. Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Settled In
Posts: 25
Joined: Thu May 30, 2013 7:35 am Country: USA |
I guess it depends on the car. The bare body shell of my Sprite is light enough that I wouldn’t be *too* worried about being crushed by it. |
Top Contributor
Posts: 6216
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
jegs.com part # Part Number: 555-81241 or type in Rotisserie
I don't know why links don't work? Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Links work fine for me.
Chris
|
|
Top Contributor
Posts: 6216
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
When ever I click on it it goes to a Main page.... Weird!
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: Doright and 50 guests