Brand new Rotisserie $899!!!!!!!!!!!!!

Any questions about tools or supplies. Post your compressor/gun questions here.



Top Contributor
Posts: 5187
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Wed Mar 24, 2021 1:59 pm
I wish I could have found this b4 I bought mine! This is a Killer deal from a well known supplier, It wont get much cheaper than this guys.
Those Chinese they will literally work for penny's how America is going to compete on an international level is beyond me? The Race to the bottom is on again! With a one world economy dragging us down forcing Americans to compete with third world labor.

https://www.jegs.com/i/JEGS/555/81241/10002/-1

Of course You get what you pay for! :rotfl: :flatten: ****
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.

User avatar

Top Contributor
Posts: 1785
Joined: Sun Dec 16, 2012 4:46 am
Location: Canberra
Country:
Australia
PostPosted: Thu Mar 25, 2021 6:26 pm
rotisserie1.jpg


rotisserie2.jpg
Chris



Top Contributor
Posts: 5187
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Thu Mar 25, 2021 8:37 pm
I have seen that done before That's BRAVE!!!!!

I cant say I would try that.
I would think Anyone's wife would cave to $899 over doing that lol at least I would hope so? If not? Dam Dude! your not Loved very much are you?
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.

User avatar

Top Contributor
Posts: 1785
Joined: Sun Dec 16, 2012 4:46 am
Location: Canberra
Country:
Australia
PostPosted: Thu Mar 25, 2021 9:28 pm
:rotfl: It's not mine.

Proves though, that some of what you see is way over-engineered. The one you linked is probably better suited to a shop doing lots of different cars where all the adjustability can be used. I had a stand for bonnet and guards which was similarly built. Thought it was a bit light but it did the job admirably.
Chris



Top Contributor
Posts: 5187
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Fri Mar 26, 2021 7:34 pm
Jegs broke the link to that post try this one?

https://www.jegs.com/i/JEGS/555/81241/10002/-1

I myself got this one by Titan
Its ok cant complain for a cheapy China built unit it holds my car up and its rated for 4500 lbs!
https://www.mile-x.com/titan-rot-4500-a ... -capacity/
I did not buy it through that company though I got it from a Local distributor took them a couple weeks to get it in for me but I did get it.
I paid $1200, $1400 with all the add on's for different set ups.
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.



Settled In
Posts: 25
Joined: Thu May 30, 2013 7:35 am

Country:
USA
PostPosted: Sat Mar 27, 2021 12:47 am
Doright wrote:I have seen that done before That's BRAVE!!!!!

I cant say I would try that.
I would think Anyone's wife would cave to $899 over doing that lol at least I would hope so? If not? Dam Dude! your not Loved very much are you?
I guess it depends on the car. The bare body shell of my Sprite is light enough that I wouldn’t be *too* worried about being crushed by it.



Top Contributor
Posts: 5187
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Sun Mar 28, 2021 6:34 am
jegs.com part # Part Number: 555-81241 or type in Rotisserie

I don't know why links don't work?
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.

User avatar

Top Contributor
Posts: 1785
Joined: Sun Dec 16, 2012 4:46 am
Location: Canberra
Country:
Australia
PostPosted: Sun Mar 28, 2021 3:50 pm
Links work fine for me.
Chris



Top Contributor
Posts: 5187
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Mon Mar 29, 2021 7:44 pm
When ever I click on it it goes to a Main page.... Weird!
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.

Return to Tools and Supplies

Who is online

Users browsing this forum: Google [Bot] and 14 guests