Ooooh, there's a 1.3mm now.
The one I have now is 1.0mm and I'd like to add a 1.2mm. I already have a 1.3mm midi gun (the red Star S1000) but I don't really see the point. If I want a narrower fan with 1.3mm tip then the Star or the AZ3 will do just fine depending on the size of the job. Or, if it's a bigger panel then one of the Pro Lites.
The advantage of the AZ4, and the reason why I keep the ANI midi guns, is that the AZ4 runs at extremely low pressure (<15psi) but atomises really well, so it is easy to put the paint where I want it, without overspray. For SMART repairs or little blow-ins they are awesome.
I've said it before but before I even mix the paint I go over each job. Sometimes holding a gun, usually not, and plan how I want to attack it - difficult spots and so on. I imagine what I need from a gun to give me the result I want, considering the paint I'm using and that usually narrows it down to one or two. I then consider things like temperatures and how that will impact my finish - that usually determines the size tip that I'll use.
First Impressions Of My GTi Pro Lite
21 posts
• Page 3 of 3 • 1, 2, 3
Chris
|
|
21 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 54 guests