Hey all,
I’ve been considering a disposable cup system. Everything I’ve read on this forum and others have commented that the Dekups system is significantly cheaper than the 3m setup.
If you include the cost of filters (3m seem to be included in the lids- is that so?; and the devilbiss are sold separately from the cups/lids), the dekups seem to come out more expensive per cup than the 3m.
I’ve figured around $2.20 per cup for the 3m and $2.55 per cup for the devilbiss.
Am I missing something here?
Is there anything remarkably better than one system over the other?
Thanks in advance,
Andrew
3M PPS 2.0 vs Devilbiss Dekups
9 posts
• Page 1 of 1
I've tried them, most are to expensive and cumbersome for me.
I use the DeVilbiss bag system, it works better and all I have to replace is a quart size ZipLock brand freezer bag. Everything else, like the grommets, I reuse. Shop around for a good price. https://www.ebay.com/itm/333830332689?c ... gkQAvD_BwE JC.
(It's not custom painting-it's custom sanding) |
|
JC,
I just ordered the 24 oz DeKups starter kit that has the disposable liners that look like plastic cups. Would the adapter you are using with plastic bags be the same? I like the zip lock bag idea as an alternative to having to buy the plastic cups. 1968 Coronet R/T
ACTS 16:31 |
|
It looks like TCP global and Harbor freight now have pps gen 1 knockoff systems for less than half the price of the pps 2 and dekups system. May give the TCP global set a try and report back
|
|
SATA cups
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Will those work on an Iwata or DeVilbiss Tekna? Or are they only for pampered professionals with high dollar Satas? 1968 Coronet R/T
ACTS 16:31 |
|
The kit comes with several adaptors to use in different cups.
Once mounted in the cup, it stays in the cup and never removed. It's pressed in to be water tight. You can still use the cup as usual without the bag if you need. The bag grommet that holds the bag in, can be reused. It's a great cheap system. Zip-Lock freezer bags (1 qt size) work even better than the originals. JC.
(It's not custom painting-it's custom sanding) |
|
why yes sir there is a adapter for almost any spray gun SATA RPS Adapters for non-SATA Spray Guns Adapters with QCC for competitor sprayguns for a quick change of SATA RPS 0.9L and 0.6L and 0.3L "Standard" Correct adapter for your non-SATA spraygun: 125211 M 16 x 1.5 Female Thread Iwata W 400 Iwata WR 400 Iwata LPA 94 Iwata VXL Primer Gun Iwata LPH 400 125252 G 3/8 Male Thread DeVilbiss PRI DeVilbiss GTI DeVilbiss GFP DeVilbiss GFV DeVilbiss GFHV DeVilbiss 510 125278 G 1/4 Male Thread Iwata W 300 Iwata LPH 300 Iwata LS 400 Supernova Iwata WS 400 Supernova Kremlin M 21 G Eminent E13 Airgunsa AZ40 HTE 125294 M 12 x 1 Male Thread Walcom FX GEO Walcom FX HVLP Asturo OM Green 126326 G 3/8 Male Thread Graco 3M PPS 133595 12 x 1.5 Male Thread Sagola 403 G Sagola 433 G Sagola 434 G Sagola 444 G Sagola 450 G Sagola 4100 G Sagola 4200 G Sagola 4300 G Extreme Dux Gravity Flow Cup Spraygun 133827 G 3/8 Female Thread Optima 800 Optima 900 Finex FX 300 135111 NPSF G 3/8 - 18 Male Thread Sharpe Platinum Sharpe Titanium 135798 M 10 x 1 Male Thread Sagola 475 Mini-Gun 150136 M 16 x 1.5 Male Thread DeVilbiss Starting Line HVLP Spray Gun 150151 M 11 x 1 Male Thread DeVilbiss Starting Line Mini Spray Gun 164608 7/16" - 14 UNC Male Thread DeVilbiss SRi 188664 M 18 x 1.5 Female Thread Sagola 4400 G Extreme Sagola 4500 G Extreme 193276 G 1/8 Male Thread Iwata LPH 80 147272 G 1/4 Female Thread Iwata W 100 Iwata LPH 100 Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Glad I asked.
1968 Coronet R/T
ACTS 16:31 |
|
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 54 guests