Hi Guys,
Been a long time since I've been here.
I'm counting on one of you pro's to save me some time.
We have a 2000 Toyota Sienna that is in really great shape, (and in trying to keep it in great shape),
I want to seam seal and undercoat it.
I purchased some Eastwood undercoating and I have their gun/wands.
I also bought a bunch of the internal-frame spray that I want to use to get into tight areas.
I also want to get some wax or sealer behind the side door plastic.
I found a video on removing the bumper cover (was easy).
Can someone tell me how to remove the cladding that is on the doors?
Also there is a small spot of rot behind the left rear wheel.
(If it wasn't hidden under the wheel well liner, I would have caught it a lot sooner).
In hammering/grinding it out I found a sort of foam between the panel seams.
Is this what joins them?
Thanks
Marc B.
PS. For those that remember, my '68 Mustang is still just sitting in epoxy primer.
Drivetrain is in it, and I'm waiting my turn in line for a painter to take it from here.
How to remove Sienna side cladding?
1 post
• Page 1 of 1
Fully Engaged
Posts: 339
Joined: Mon Jan 07, 2008 12:17 pm Location: Southeast, MA |
Don't sweat it, Life's too short!
|
1 post
• Page 1 of 1
Who is online
Users browsing this forum: amsetikas, Drew, Google [Bot] and 156 guests