Blending panel that is already painted.
3 posts
• Page 1 of 1
Non-Lurker
Posts: 1
Joined: Wed Feb 14, 2018 9:27 pm Country: USA |
Is it possible to blend a fender into the hood/door if the fender has already been painted/clear coated?
|
Top Contributor
Posts: 6777
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
probably not, I don't know why you would want to. your going to want to sand everything, fender, hood, door and anything else that will need coated. then match your color as close as you can and spray the fender blending to the hood and door then clear the complete panels.
Jay D. they say my name is Jay
|
taking a gamble here... im thinking you tried to just paint the fender and dont like the match ?
if that is the case sand hood fender and door with 800-1000 grit, if it is a metallic best to use a clear base on sanded 800 so no sand scratches show. then paint your fender blending as you need. just know blending does not work and could look horrible if your color is not close Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 125 guests