How to put in new studs for rebar?

General Discussion. Make yourself at home...read, ask and answer!



Non-Lurker
Posts: 1
Joined: Mon Jun 11, 2018 8:53 pm

Country:
USA
PostPosted: Mon Jun 11, 2018 9:09 pm
Hello,

I am not a professional. This weekend I was taking off the reinforcement bar and had to grind and drill into the stud in order to get it off. But now I am wondering how to get the stud back? What is the proper way to do this? Is it essentially a bolt welded from the other side? Thanks for your help.

https://i.imgur.com/KgrsHeQ.jpg
https://i.imgur.com/ONcCrtn.jpg
https://i.imgur.com/4slM4dH.jpg
https://i.imgur.com/eL5eE02.jpg



Top Contributor
Posts: 4018
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Tue Jun 12, 2018 2:30 pm
You might look and see if you can get access from above through the floor but I doubt it.

I would cut the cap off Frame rail and weld a new piece on if it with new studs or bolts if it were me doing it.
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.

Return to Body and Paint

Who is online

Users browsing this forum: Majestic-12 [Bot] and 23 guests