Hoping there is someone familiar with PPG's base coats. The color I need is available in their Shopline JB, JBP and their Global lines. The cost is great between the different lines. A gallon of JB is $230, JBP is $300, and their premium line "Global" is $800. It's not available in their Deltron line. The job is a complete repray, no color matching needed. Just wondering if the higher dollar paint is worth the extra cost. I have shot their Deltron and loved it, except for the cost. I'm afraid the cheaper JB will be like water and I'll end up spending just as much, since more gallons may be needed. The guy behind the counter said the higher dollar paints are generally thicker but he also said I won't be able to tell the differance after the clear is on. If your familiar with these brands, your advice is much appreciated.
Thanks in advance ~ Lenny B
PPG paint question, Shopline JB versus JBP versus Global?
16 posts
• Page 1 of 2 • 1, 2
Try getting a quote on Automotive Art Motobase LV.
Email the paint code to: chad sperry <[email protected]> and ask for a quote shipped to your door. I quit overpaying for PPG a long time ago. 1968 Coronet R/T
ACTS 16:31 |
|
Yeah, PPG has about priced itself off the face of the earth for the hobbyist. And Shopline... never again, it should not take 5 or 6 to coats to achieve hiding and they can't make it the same color twice in row.... What Coronet said there plus Chris here might be able to get Tamco in some bases for you. He was very competitive when I checked last......
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
Settled In
Posts: 43
Joined: Thu Dec 10, 2015 12:07 pm Country: USA |
Since you are painting the entire car, you can get away with the Shopline or Shopline Plus since you aren't trying to match a color. You should go with a better clear, like DCU 2021 or DC 4000. That is where you get the better uv protection and longevity out of the paint job.
|
what is your paint code ?
i use Global but i get it cheap. let me look up code Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
The 1968 Ford color code is: O Sea Foam Green The PPG / Ditler code is: 43529 |
|
do you have a finish master out there ?
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
yes |
|
give me the address to your finish master and phone number, ill see if they will honor my cost out there for you.
on that color you should be fine in any paint line and use better clear. Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Thanks Dave,
Here's the local Finishmaster: Finishmaster - PPG, 24600 Drake Rd. Farmington Hills, MI 48335 (248) 477-5002 |
|
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 168 guests