why am i getting this iridescent color in my black base coat
4 posts
• Page 1 of 1
Non-Lurker
Posts: 2
Joined: Sat Oct 27, 2018 9:25 pm Country: USA |
I was painting a bumper and i was using Omni base coat .I mixed one part paint one part medium reducer. It requires no activator/Hardener. I read on one of the threads that I can use 1 tablespoon of the clear Hardener to make it more durable . I wonder if that was the culprit?also i prepped it with windex. Any help will be appreciated?
|
Top Contributor
Posts: 6771
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
it looks like a slight blushing problem caused from hi humidity and or a fast reducer. it should go away when you clear it. a simple test you can do is to put some water on a small spot and if it goes away then the clear will do it to. it won't make it go way physically, but some how it disappears magically.
Jay D. they say my name is Jay
|
Non-Lurker
Posts: 2
Joined: Sat Oct 27, 2018 9:25 pm Country: USA |
Thanks Jay I just gave it another coat today then clear it. It came out good.
|
Top Contributor
Posts: 6771
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
GREAT
Jay D. they say my name is Jay
|
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: ArtT, Google [Bot] and 179 guests