I’m confused on epoxy primer step
16 posts
• Page 1 of 2 • 1, 2
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
So I’m doing a full restoration on my 1987 bmw e30 , I have done the welding and have applied some fibreglass , should I have laid epoxy primer before body work or can I apply it after the body work?
|
Top Contributor
Posts: 6771
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
The preferred method is epoxy first, but you won't go up in flames if you don't. main thing is CLEAN metal. interested in what your using the fiberglass on, pictures maybe?
Jay D. they say my name is Jay
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
I used fibreglass over the welds after they were grinded down this is my first attempt at doing a complete restoration.
|
Top Contributor
Posts: 6771
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
after welding you should get the area metal close to what it should be then use some auto body filler. pictures
Jay D. they say my name is Jay
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
I will post some pics when I get home , reason for fibreglass in my own thought process was strength over regular body fill , I have a lot to learn , but that’s why I’m on here.
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
My first patch panel try
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
Car was in a junk yard on its roof for 10 years so I cut the old roof off and welded a used one on and deleted the sunroof
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
Engine bay ready for the Ls swap
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
This side I messed up but I made it work best I can
|
Settled In
Posts: 10
Joined: Sat May 02, 2020 1:38 pm Country: Canada |
Old tail panel cut off , new one on the way and also beefed up the rear with rectangle tubing
|
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: ArtT, Bill911, Google [Bot] and 190 guests