If I had to guess, that is what I thought--assuming that you end up removing at least one layer during the sanding process.Doright wrote:I do 4
Cut And Buff Or Flow Coat??
25 posts
• Page 3 of 3 • 1, 2, 3
No Turning Back
Posts: 714
Joined: Thu Apr 05, 2012 12:30 pm Country: USA |
|
cut it and reclear it, use both class cleaner and wax and grease before clearing.
the glass cleaner will get all the dust residue off. this is especially important on black. 8/10oz of clear is cheaper than a days labor Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
No Turning Back
Posts: 714
Joined: Thu Apr 05, 2012 12:30 pm Country: USA |
I think I will go your route for this job coming up. I will however do some practice buffing on a couple of test panels I shot getting used to the AZ3 I bought back in the summer. The wife owns a 2005 Vulcan that she wants a color change--Ihave to make it perfect or I'll never hear the end of it, LOL! |
i would leave some light orange peel in a OEM car, that orange peel is there for a reason. it hides stamp lines and waves in the production panels, its not the same as blocking a custom job and polishing. Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
No Turning Back
Posts: 714
Joined: Thu Apr 05, 2012 12:30 pm Country: USA |
I never looked at it that way but it makes sense. Ever since I have been doing more painting I tend to look at OEM jobs and can always see a certain amount of peel--I used to think that the more expensive cars would have a perfectly smooth finish--not really. |
25 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: badsix and 148 guests