Tamco 5311
16 posts
• Page 2 of 2 • 1, 2
yeah my primer and silver and black paint will be here thursday cant wait lol!!
|
|
well got the product had to reduce it a little bit to get out of the 1.8mm tip gun.
sprayed it about 2 hours ago got one little run in it.. just curious as to how long i should wait before i sand on it and shoot my base and should i use red or grey scotch brite? |
|
Non-Lurker
Posts: 2
Joined: Fri Apr 02, 2021 7:04 pm Country: USA |
I believe it is 12 hours for 60+ degrees. You can use it as a sealer if you 4-1-2 also.
|
3-4 hours depending on your weather conditions and shop temp. You will probably want to sand it down nice and flat. I like to get it down flat, then sand to at least 600, then I shoot a sealer prior to BC. Sent by the random thoughts from the voices in my head...
|
|
Non-Lurker
Posts: 3
Joined: Tue Mar 08, 2022 10:38 am Country: USA |
So 2 part reduction? with what tip1.3 must come out like straight thinner.lol |
Non-Lurker
Posts: 4
Joined: Mon Dec 19, 2022 9:29 pm Country: USA |
Mixed as a sealer, I had no issues with a 1.4.
You have to take time to mix it properly, you will feel it when it blends in the mixing cup. I like using the primer both as a high build & thinner coats as things progress. I just mixed a few cups today as a sealer for a pickup bed floor. I put on a couple of coats to get a uniform color then painted it. |
16 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: Google [Bot] and 96 guests