Martin Senour System 1 - Epoxy Primer?

General Discussion. Make yourself at home...read, ask and answer!



Settled In
Posts: 14
Joined: Wed Sep 22, 2021 5:05 pm

Country:
USA
PostPosted: Fri Sep 24, 2021 3:52 pm
Looking for a suitable epoxy primer to use under my 2K HS FP410 primer.

Local shop has a gallon of PIP102, but there's not much information here on it.

Any recomendations? Should I look for a different epoxy primer? I already have the FP410 - so that isn't going to change.

Oh, the gallon at the local store is nearly 7 years old. I'm a concerned about that, should I be? He said he could get a fresh can if that is what I wanted to do.

Thanks

User avatar

Board Moderator
Posts: 8741
Joined: Fri Oct 20, 2006 12:40 pm
Location: ARIZONA
PostPosted: Sat Sep 25, 2021 11:25 am
Order a gallon from the Store Front on this site.
Shipped for free right to your door, quality epoxy primer and not a risk for being out dated.
1968 Coronet R/T


ACTS 16:31



Top Contributor
Posts: 5331
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Sat Sep 25, 2021 7:43 pm
7 years old? on the shelf? UH NO! that's Trash! and they know it!

Chriss sells some good stuff on the forum store you can trust.
Dennis Barnett
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.



Settled In
Posts: 14
Joined: Wed Sep 22, 2021 5:05 pm

Country:
USA
PostPosted: Sun Sep 26, 2021 6:19 pm
PIP102 says its epoxy. But it's 1 part.

Even new, I don't want it. Lol



Settled In
Posts: 14
Joined: Wed Sep 22, 2021 5:05 pm

Country:
USA
PostPosted: Fri Oct 15, 2021 12:55 pm
I ended up going with the Crossfire CP400 epoxy under the FP410.

User avatar

Board Moderator
Posts: 8741
Joined: Fri Oct 20, 2006 12:40 pm
Location: ARIZONA
PostPosted: Fri Oct 15, 2021 1:54 pm
Get more bang for your buck with epoxy primer that mixes 1:1. You end up with two gallons of RTS (ready to spray) epoxy instead of 6 quarts.
1968 Coronet R/T


ACTS 16:31

Return to Body and Paint

Who is online

Users browsing this forum: badsix, Google [Bot], Google Adsense [Bot], gprs, Leomein and 98 guests