Paint inside of truck bed
6 posts
• Page 1 of 1
Non-Lurker
Posts: 4
Joined: Sat Jun 04, 2022 9:08 pm Country: USA |
Restoring a long bed pickup truck. I want to paint the inside of the bed the same body color as the outside of the truck. Any ideas on how to access all areas to apply a few coats?
|
Top Contributor
Posts: 6214
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Painting? Or sanding?
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Top Contributor
Posts: 1396
Joined: Thu Jan 27, 2011 2:16 pm |
mount the bed on a rotisserie.
|
I normally use a ladder so I can reach over the edge and spray the underside, walls and floors of the bed.
You have to drape the air hose over your shoulder to keep it from hitting the truck, so try going through the motions first without spraying any paint. I paint the bed separate from the truck and then reinstall it. 1968 Coronet R/T
ACTS 16:31 |
|
Top Contributor
Posts: 6731
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
theirs a lot of variables when doing this. what i like to do is to paint the inside first, cover the outside then spray the inside. if your doing just the walls then its easy. If you're painting the floor also, do one coat on the walls only then on your second coat on the walls do the floor. you can reach over the side to get the second coat on the floor area if you want. removing the box is the best way to go.
Jay D they say my name is Jay
|
Top Contributor
Posts: 6731
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
looks nice! that's the way i like to do it, spray the walls then Rino line the fender wells and floor. Jay D. they say my name is Jay
|
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: magee84 and 122 guests