So I had my 1975 Scout stolen, they damaged the back and front hood on a complete paint job I did. My original process was bare metal 2k primed urethane base and 5 coats of clear.
They basically took paint off to the primer it two long stretches about 20 inches long. How would you guys repair this? I have no experience doing resprays as I've only ever painted a whole vehicle. Suggestions and thanks for the help. Sorry I don't have pics the truck is in a location I'm not at currently.

If there isn't any metal damage, dents, etc., just feather out the scratches, with a DA. If they are that long, I'd start with 120 grit, and finish with 180 or 220. Hand block with a finer paper, and primer the bare areas, extending onto the feathered areas. Block again when cured, and repaint primer area, blending it onto the undamaged areas. Clearcoat the entire panel.

thank you sounds like a plan