Just painted my VW Thing about 2 weeks ago and looked like crap; so decided to recoat.
Using the same color.
Question after sanding smooth do I need to re-primer or can I just repaint????
Need Primer???
5 posts
• Page 1 of 1
It looks like you've sanded through in a number of spots and I can see some bog there too. Yes, reapply primer. Doesn't need to be thick, just use it as a sealer then lightly sand to not coarser than P600 before applying topcoat.
Chris
|
|
Fully Engaged
Posts: 113
Joined: Thu Feb 28, 2019 2:58 pm Country: New Zealand |
Yep, as Chris says.
And also paint behaves differently over bog, primer and old topcoat. So you could get different gloss levels and it could be a bit transparent over the light bits too. Looks like a fun project, good luck. |
Top Contributor
Posts: 6738
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
AS Bill911 said, the paint may behave different over the BOG (BONDO). its good practice to at least spot prime the bog spots and sand them, then use a sealer before your topcoat. did you catalyze your first color coat? Jay D. they say my name is Jay
|
No it is just Rustoleum Hunter Green |
|
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 95 guests