Have A few questions on Martin senour Products?!

- On the bare substrates (metal) I plan on using Epoxy primer (5120)
after That I should be able to do my body work (FILLER) for my Reason I'm Going with Martin Senour that there is a NAPA store Thats Qwite close to me with some decent hours that it is open!

Anyways After the EPOXY what could I use for the 2k?

Would tech/prime plus work? (5102) Or could I go with Evercoat?

Any positive feedback would be great!

Winston

[/b]

I use the Martin Senour totaly,it's a real nice product. Call this # it's there fax back line,you'll need a fax machine. 1-800-824-0631,I use the epoxy but I haven't used it under a urethane primer,the product data sheets will give all that info on the product you would like to use.
Dale

Check out this web site. You can get all the information you want on the products. www.martinsenour.autopaint.com

I done some proir research on there web site, I may need to call the #
I was just curious if I be able to use Evercoat Or just stick with the
martin Senour For the priming/blocksanding "phase"


Winston