Does anyone know when the Tech article on building a Rotisserie will be posted to the Web Site. I already have several sets of plans but I want to get as many ideas as I can before I build my own. Thanks Stan

hey glad to see you from NC me to just right up the road from you talk later

Hey I looked you up on the map. Quite a ways, but if I get up that way I'll stop in. Stan

We covered this topic recently on the Tools and Supplies section. Please see the following link,

http://www.autobody101.com/forums/viewt ... eefc778449

It contains the link to a really good set of plans.

Best regrads
Stacey

OK thanks. I got that one. I thought there was one going to be posted to the site and be able to click on to it on the right side bar on the home page where it says Rotisserie.

Well, we don't have permission to post his plans on our site. I will write him and ask for permission and check it out with DelCity64. Rotisserrie plans are something we need on this site.

Best regards
Stacey

I thought I would've found something by now, but I have had no luck. I really want to put something complete that will apply to any car. The few plans I have seen either apply to very specific cars, or look unsafe. I have also approached several manufacturers, but all were either unwilling to give away trade secrets, or afraid of the liability. I am still working on it. It would be very useful.