Page 2 of 2

Re: 2001 SE Miata Rust Correction

PostPosted: Thu Jun 28, 2018 7:14 pm
by dunk
Planning on continuing work on this over the weekend? Any comments based on the pictures I've posted.

Duncan

Re: 2001 SE Miata Rust Correction

PostPosted: Fri Jun 29, 2018 12:47 am
by Doright
Looks like your doing a good job to me.

Just keep cutting the rust off, weld new metal in easy money.

Re: 2001 SE Miata Rust Correction

PostPosted: Sun Jul 08, 2018 6:03 pm
by dunk
Made a little more progress.

Sandblasted off the rust that remained on the interior panels and primed with epoxy primer. Next step is to weld back in the inner structure, then prime again. After that I'll start fitting the outer skins.

Re: 2001 SE Miata Rust Correction

PostPosted: Sun Jul 15, 2018 1:40 pm
by dunk
Welded the inner structure back in place and primed the backside of the quarter panel patches. They're all cut to fit, but I ran out of welding gas so it will have to wait for another weekend.

Re: 2001 SE Miata Rust Correction

PostPosted: Mon Aug 06, 2018 8:11 am
by dunk
Welded in the outer panels this weekend. Progress slow, but definite.