Need help with AMD fender installation an

More of an art than a science - discuss metalworking and welding here.



Non-Lurker
Posts: 4
Joined: Thu Jan 28, 2021 8:08 pm

Country:
USA
PostPosted: Sat Jan 30, 2021 1:56 pm
I fit the passenger side fender today and it seemed to fit pretty well. I looked at the drivers side again and I'm pretty sure they over bent the main body line and that's why it fits like it does. I'm going to cut the brace on the back and see if I can tweak it a little and the weld it back. Pretty sure that will fix the problem. Thanks for all the input. I really appreciate it.



Top Contributor
Posts: 6216
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Sat Jan 30, 2021 3:31 pm
i would look at the door closer first it could be all mud
it wouldn't be the first one I have found that was caved and paved.

Thats really far out, if its AMD fenders, I would suspect the door has a ton of filler on it.



this is metal work!
https://www.youtube.com/watch?v=5Ch_mDu5jDA
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator
Line Maintenance A&P Mechanic and MOC Tech specialist.
Previous

Return to Welding & Metal Fab

Who is online

Users browsing this forum: No registered users and 34 guests