AutoBody101.com

I fit the passenger side fender today and it seemed to fit pretty well. I looked at the drivers side again and I'm pretty sure they over bent the main body line and that's why it fits like it does. I'm going to cut the brace on the back and see if I can tweak it a little and the weld it back. Pretty sure that will fix the problem. Thanks for all the input. I really appreciate it.

i would look at the door closer first it could be all mud
it wouldn't be the first one I have found that was caved and paved.

Thats really far out, if its AMD fenders, I would suspect the door has a ton of filler on it.



this is metal work!
https://www.youtube.com/watch?v=5Ch_mDu5jDA