Thanks for your replies, I really appreciate your patience and great advices, I will remove the bracing then, and try my best, but I'm really happy to learn how to work with this, It will be useful in the future as well, I'm sure about it .
I will update soon !
Welding on the roof, warped
14 posts
• Page 2 of 2 • 1, 2
Settled In
Posts: 51
Joined: Wed Feb 01, 2012 3:01 pm Country: France |
|
Top Contributor
Posts: 6234
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
I dont know what your working on but there is always a Dollar value involved.
If this is just some plain Jain low value car under 20k when done sand the Bead off seal with some fiberglass filler and call it good. I have seen much worse done. Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Settled In
Posts: 51
Joined: Wed Feb 01, 2012 3:01 pm Country: France |
I'm working on a Euro 320i E30 coupé, Less than 20K for sure, but still a great little classic car
Thanks for your advices, the roof is now way better than it was, it still needs a bit of work, especially since I went a bit too far and got a high spot, but overall it has worked really well ! I will take some pictures next week |
Top Contributor
Posts: 6234
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Check out the video I posted in that last post of mine.
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
14 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 48 guests