Will Meguiars 105 take this out

Discuss anything after that final masking comes off.

Posts: 6
Joined: Thu Aug 06, 2020 6:30 am
Location: North of Boston, MA
PostPosted: Thu Sep 10, 2020 7:20 am
I had slight orange peel on a panel and sanded it down to the level shown in the picture. Will an aggressive compound like M105 take this out or will I still have pockmarks?

I'm open to suggestions. It's a vintage German scooter but I don't want to go crazy on it. thanks

User avatar

Board Moderator
Posts: 8347
Joined: Fri Oct 20, 2006 12:40 pm
Location: ARIZONA
PostPosted: Thu Sep 10, 2020 9:29 am
That's orange peel and should be wet sanded out.
Doesn't look too deep so maybe start with 1500 grit and a hard block and sand just enough to remove shiny spots.

Meguiars M-100 is light years ahead of the M-105 and doesn't contain any fillers.
1968 Coronet R/T

ACTS 16:31

Top Contributor
Posts: 1196
Joined: Thu Jan 27, 2011 2:16 pm
PostPosted: Fri Oct 23, 2020 6:37 am
what coronet said. his suggestion of M100 has saved me a crapton of labor when it comes to buffing

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 2 guests