auto glass

Discuss anything after that final masking comes off.
PostPosted: Thu Aug 26, 2004 12:39 pm
Any ideas on getting small scratches out of auto glass so it looks new again.
thanks Bill



No Turning Back
Posts: 633
Joined: Mon Feb 23, 2004 9:10 pm
Location: Denver
PostPosted: Thu Aug 26, 2004 11:08 pm
J C Whitney sells glass buffing kits. If you do a windshield, go very easy or you can cause waves that will induce distortion.

User avatar

Board Moderator
Posts: 6683
Joined: Tue Feb 24, 2004 7:00 pm
Location: central Ohio
Country:
USA
PostPosted: Sat Aug 28, 2004 5:01 pm
Yeah, Big Jim is talking about the kit they sell that contains cerium oxide (not sure about that spelling). I had an old Honda work beater about 6 years ago that I picked up cheap because it had some nasty sratches in the windshield and side window. I was really careful and took a couple of hours with the material on the supplied buff and it got out over 90% of the nasties. You do have to watch about being to aggresive with it though. Just go easy and follow the directions.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 62 guests