Matching factory orange peel with waffle pad

Discuss anything after that final masking comes off.

User avatar

Fully Engaged
Posts: 374
Joined: Sat Oct 17, 2015 8:09 pm
Location: Oak hills, CA.
Country:
USA
PostPosted: Fri May 27, 2016 12:30 am
Thanks for the link Dave.

Sure, Ill take part numbers on the pads.
Have you used 3m cutting compound "A"?
I'm using that now and it doesnt seem to get the 1500 grits scratches out, have read good things of m105 but have not tried it. It sounds like it will cut the 1500 out in not time.
May also be my pads.
Fly like a butterfly, sting like a bee.

User avatar

Top Contributor
Posts: 1745
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Fri May 27, 2016 9:28 am
Foam pads


use M105 and pad below
http://3mcollision.com/products/buffing ... -inch.html

Then i use Ultrafine with the pad and compound below
http://3mcollision.com/3m-perfect-it-ex ... ounce.html

http://3mcollision.com/products/buffing ... 05708.html


hope this helps.

my steps are 2000 wet for dirt nibs
3000 trizact on DA
5000 trizact on DA
M105 on white foam
3M ultrafine on the light blue pad
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal

User avatar

Fully Engaged
Posts: 374
Joined: Sat Oct 17, 2015 8:09 pm
Location: Oak hills, CA.
Country:
USA
PostPosted: Thu Jun 02, 2016 3:54 pm
Thanks for the info Dave. I will be investing in some m105 and trizact 3-5k paper.
Fly like a butterfly, sting like a bee.

User avatar

Top Contributor
Posts: 1745
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Thu Jun 02, 2016 5:44 pm
yeah buddy no problem you will love it. you do need water with the trizact. i just use a squirt bottle
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal
Previous

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 56 guests