1k cellulose top coat gloss help?

Discuss anything after that final masking comes off.



Non-Lurker
Posts: 4
Joined: Thu Feb 01, 2018 7:50 am

Country:
United Kingdom
PostPosted: Thu Feb 01, 2018 8:02 am
Hello i coated my car in a 1k cellulose primer as recommended by my local paint shop( as its my first time im doing it in a garage) the finish came out all okay, but i thought i brought a base coat after that, however i brought a 1k top coat gloss, i was just wondering do i have to clear coat over this or can i just go straight to sanding/buffing to finish off the paint?
thanks

User avatar

Top Contributor
Posts: 3957
Joined: Wed Sep 07, 2005 9:59 am
Location: Louisville, KY
Country:
USA
PostPosted: Thu Mar 29, 2018 12:10 pm
I think most are confused to what you really have.
Is it Enamel, Lacquer, Urethane? they're all 1K and
don't need a clear coat, but you can if you want.
Lacquers and urethane rub out easily, most enamels can
if activated and allowed to harden.
JC.

(It's not custom painting-it's custom sanding)

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 47 guests