What to do NOW?? HELP!!

Discuss anything after that final masking comes off.



Non-Lurker
Posts: 1
Joined: Mon May 07, 2018 7:35 pm

Country:
USA
PostPosted: Mon May 07, 2018 7:48 pm
Hello All,
Ok so i had this Mobile Detail guy from my local area FB network come out to wash buff and wax my car.. Well i went outside to check on it he had just
started the buffing and i seen he had put some red streeks in my paint from the buffer and the red pad he had on his buffer.

I told him to stop and just get on down the road.

The marks arnt really deap but not sure won what i can do to fix it..

Im thinking about just wetsanding it with 2000 or 3000 gritt

Should that fix the issue? Or should i be doing somthing else?
http://i1253.photobucket.com/albums/hh5 ... bbmmqc.jpg

Thanks In Advance.

User avatar

Board Moderator
Posts: 4908
Joined: Tue Feb 24, 2004 7:00 pm
Location: central Ohio
Country:
USA
PostPosted: Mon May 07, 2018 9:28 pm
If it is the red from whatever pad he was using then it is "transfer" and should come back off. Any chance you've got a "real" paint correction/detail kind of shop or detail guy around you. A decent autobody shop could also take care of it if they have a cut and buff guy. I think just you taking some sandpaper to it is going to get "you" in more trouble. Yeah, you'll get the red off along with a lot more coating......then what? At least get it looked at before you do anything......
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!



Top Contributor
Posts: 1052
Joined: Thu Jan 27, 2011 2:16 pm
PostPosted: Tue May 08, 2018 12:45 pm
looks like thats on top of the paint-possibly dried up product.

''wet a rag with water and rub them marks before anything.

User avatar

Top Contributor
Posts: 1276
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Tue May 08, 2018 4:58 pm
paint got a little hot, this happens a lot.

should come right off, might need a little light sanding.

take some acetone and pull the color off see how bad it is underneath
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 1 guest