https://eagleabrasives.com/en/info/buflex
Still having issues with color sanding to buff, the Tamco 2140 clear. I would like to try sanding dry and see how it does.
has anyone used the Eagle buflex system?
5 posts
• Page 1 of 1
Settled In
Posts: 15
Joined: Tue Dec 27, 2011 8:14 am Location: Wellborn, FL Country: USA |
|
I use the Eagle Asilex sheets & 6” DA pads in 600/800/100 dry and really like them
Sent by the random thoughts from the voices in my head...
|
|
What kind of issues? What steps are you using now? What compounds and pads? 1968 Coronet R/T
ACTS 16:31 |
|
Settled In
Posts: 15
Joined: Tue Dec 27, 2011 8:14 am Location: Wellborn, FL Country: USA |
I thought I'd posted a reply but see it didn't show up--- We normally start with 1200 to 1500 wet sand paper, then move to 2000, 3000, and 4000 Abralon 6" and use their 3" where it is needed. This time we tried the Red Label wet dry 2000 grit 6" da cutting paper and had issues with the "squigleys". Double and triple checked to make sure we were not picking up dirt or debri. We are wet sanding with these. We can get these out using the next step but it is like cutting stone. Highly suspicious that we have a paper issue on this. (squigleys) next- I tried using my rotary polisher with wool buff and moved from that to a flex 3401 with foam heavy cutting pads then to light cutting pads using Menzerna 300-400-2400 compounds before polishing. |
It would depend on the amount of orange peel in your clear coat as to whether 1200 is a good starting place. Also depends on if your are trying to match existing finish on car or going for show car look.
My process has been developed over the years and currently goes like this: 1000 grit wet on a hard block to remove any peel and dust 1500 grit dry on an orbital DA with 1/2" thick foam pad/ hook and loop 2000 grit dry as above Rotary buffer with twisted wool pad and Meguiars M-100 (this is my #1 favorite) and will leave the finish nearly perfect by itself. From there I will use the rotary with a white foam pad and Chemical Guys optical grade. Last is Menzerna FF3800 on a black foam pad. 1968 Coronet R/T
ACTS 16:31 |
|
5 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 48 guests