I had slight orange peel on a panel and sanded it down to the level shown in the picture. Will an aggressive compound like M105 take this out or will I still have pockmarks?
I'm open to suggestions. It's a vintage German scooter but I don't want to go crazy on it. thanks
Will Meguiars 105 take this out
3 posts
• Page 1 of 1
Non-Lurker
Posts: 6
Joined: Thu Aug 06, 2020 6:30 am Location: North of Boston, MA Country: USA |
|
That's orange peel and should be wet sanded out.
Doesn't look too deep so maybe start with 1500 grit and a hard block and sand just enough to remove shiny spots. Meguiars M-100 is light years ahead of the M-105 and doesn't contain any fillers. 1968 Coronet R/T
ACTS 16:31 |
|
Top Contributor
Posts: 1397
Joined: Thu Jan 27, 2011 2:16 pm |
what coronet said. his suggestion of M100 has saved me a crapton of labor when it comes to buffing
|
3 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 83 guests