First time painting, ideas on fixing small mistakes

Discuss anything after that final masking comes off.



Non-Lurker
Posts: 1
Joined: Thu Jun 16, 2005 10:18 pm
PostPosted: Thu Jun 16, 2005 10:55 pm
Hello,

I just finished painting my 80 camaro and I think it went pretty good but i have a couple of mistakes to fix. There are a couple of dirt specks that when sanded with 1500 grit left little pinholes of the lighter primer under showing through. There is also one spot from a run about the size of a pencil eraser with the same problem. My plan was to sand the spot with 1000 grit to scuff it up a bit, spray a light coat over the area, let it dry, and wet sand the spots with the rest of the car. Im looking for a little input, or ideas. The paint is a solid color, non-metallic, single stage urethane.

Thanks

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 51 guests