does anyone out there have experience with Imron 333 High Gloss?
I just painted my boat with Imron 2.8G (333). This is the second time I have painted a section of this boat, on my way to painting the whole thing. On the hull, above the water line, I used a professional airless to allow me to finish fast on a cloudy day. It turned out well, but too much overspray for the boatyard. I then painted the section above the rubrail with a air, using a 2-1/4 quart pot and remote gun. Had slight problem with moisture, even though I used high grade filter. The finish turned out good, but have some imperfections due to bugs and dust settling on the paint. Some very small fish-eyes due to moisture in the air line (big area to paint.
Any suggestions on how to make the finish look uniform and smooth despite the imperfections?
imrom 333 or 2.8G, decided to paint boat
1 post
• Page 1 of 1
just trying to learn...
|
|
1 post
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 54 guests