Well I guess Ill start out like the 211 other "new guys" and say great site! Ive looked through the forum and was unable to get a clear idea as to how to repair my Willys fender so.. the fender has 2 curves one over the tire and one below and adjacent to the headlight which seem to work against each other when attempting to straighten my fender above the tire just behind the curve I am missing approx. 2.5in of the fender body line parrallel to the ground as well as a nasty crack that angles into the fender towards the hood my question (if everyone is still awake) can I use fiberglass to fill the hole and then weld and fill the crack and if so how do I mold the "glass to the shape of the missing metal? Willys fenders are not readily avail, or cheap if and when you can find one so.. any suggestions? thank you in advance RayBan :