I'm new at this and have a couple questions about storing the products I'm using. I'm painting a car with Summit Racing single stage acrylic urethane. I used the Summit urethane activator and Kirker "Ultra-Glo" urethane reducer. I used these about 2 months ago with very good results.
But, they have been sitting in my shed for the last two months. I live in southern Arizona so they haven't been exposed to much cold weather but there have been a couple nights that got down around 30 degrees. I can't find any info on the cans about storage concerns.
Do you think I'll be alright using these again or should I toss them out to be safe? They've all been sitting in their original containers with closed lids.
Thanks!
Storing Chemicals
2 posts
• Page 1 of 1
Non-Lurker
Posts: 6
Joined: Mon Oct 09, 2017 8:00 pm Country: USA |
|
If you resealed the containers immediately after use you should be fine.
I have paint that is over 2 years old that I wouldn't hesitate to use. The activators are what tend to go bad if not sealed properly. If you look into the activator and see any cloudiness or a seedy appearance throw it out. 1968 Coronet R/T
ACTS 16:31 |
|
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: Drew, JCCLARK, rushorwell and 108 guests