My understanding is that these model trucks are notorious for having the trim come loose. I have the missing piece and would like to re-install. What is the best way to clean up the residual tape on both the door and the trim?
What is a good product to re-install?
Side trim repair
5 posts
• Page 1 of 1
Fully Engaged
Posts: 101
Joined: Fri Apr 10, 2015 3:51 pm Country: USA |
|
could try some citrus glue remover, a eraser wheel, or some other glue remover.
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
3M makes an adhesive remover. I have used it for this same thing in the past. Might use an old credit card for a scraper once adhesive is softened. Razor blade will cut into your paint.
1968 Coronet R/T
ACTS 16:31 |
|
Fully Engaged
Posts: 101
Joined: Fri Apr 10, 2015 3:51 pm Country: USA |
Thanks guys! What product do you recommend to re-install?
|
Top Contributor
Posts: 6770
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
3M double sickie tape it comes in different thicknesses, get the thin. make sure both surfaces are clean, dry and free of any solvents or cleaning residue.
Jay D. they say my name is Jay
|
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 97 guests