I was hope that you could help.
I repainted my rear bumper. It is glossy but not as much as the rest of the car.
I used Matrix Clear Coat MX 52. Color sand 1000/1500.
Buffed Menzerna SI 1500 aggressive wool pad
3m Finesse It wool pad
3M Finesse it foam yellow pad
Buffed clean dry yellow pad
Klasse 2 on 1 sealant micro fiber on and off.
Suggestion?
Thank you
Low gloss
3 posts
• Page 1 of 1
Non-Lurker
Posts: 2
Joined: Wed May 16, 2018 9:40 pm Country: USA |
|
You still have scratches on the surface.
Try wet sanding with 2000 grit before buffing. Be sure to remove all of the 1500 and 1000 grit scratches. 1968 Coronet R/T
ACTS 16:31 |
|
Non-Lurker
Posts: 2
Joined: Wed May 16, 2018 9:40 pm Country: USA |
Did and used different final polish, I'm happy thank you |
3 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 50 guests