Low gloss

Discuss anything after that final masking comes off.



Non-Lurker
Posts: 2
Joined: Wed May 16, 2018 9:40 pm

Country:
USA
PostPosted: Wed May 16, 2018 9:43 pm
I was hope that you could help.
I repainted my rear bumper. It is glossy but not as much as the rest of the car.
I used Matrix Clear Coat MX 52. Color sand 1000/1500.
Buffed Menzerna SI 1500 aggressive wool pad
3m Finesse It wool pad
3M Finesse it foam yellow pad
Buffed clean dry yellow pad
Klasse 2 on 1 sealant micro fiber on and off.
Suggestion?

Thank you

User avatar

Board Moderator
Posts: 9878
Joined: Fri Oct 20, 2006 12:40 pm
Location: ARIZONA
PostPosted: Wed May 16, 2018 11:46 pm
You still have scratches on the surface.
Try wet sanding with 2000 grit before buffing. Be sure to remove all of the 1500 and 1000 grit scratches.
1968 Coronet R/T


ACTS 16:31



Non-Lurker
Posts: 2
Joined: Wed May 16, 2018 9:40 pm

Country:
USA
PostPosted: Thu May 17, 2018 5:45 pm
'68 Coronet R/T wrote:You still have scratches on the surface.
Try wet sanding with 2000 grit before buffing. Be sure to remove all of the 1500 and 1000 grit scratches.


Did and used different final polish, I'm happy thank you

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 49 guests