Correct Paint Can Lids for Waterborne

General Discussion. Make yourself at home...read, ask and answer!

User avatar

Settled In
Posts: 91
Joined: Wed Feb 16, 2011 3:36 am
PostPosted: Mon Jun 11, 2018 12:39 am
Hi All, need your opinions:

Apparently non-stainless steel shaft paint lids were installed on this waterborne paint bank almost a year ago. If you look at the photo you will see the rust is pretty far down the shaft and in the paint. Is the paint now junk? Or if correct stainless lids are installed and the paint strained could the paint be OK? BTW, if it matters, this is a very low volume shop.

IMG_8149 (1).JPG

User avatar

Top Contributor
Posts: 1744
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Mon Jun 11, 2018 7:36 am
whos waterborne system are you using ?

i have never seen agitator lids on waterborne
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal

User avatar

Settled In
Posts: 91
Joined: Wed Feb 16, 2011 3:36 am
PostPosted: Mon Jun 11, 2018 9:15 am
Sherwin-Williams

User avatar

Top Contributor
Posts: 1744
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Mon Jun 11, 2018 3:50 pm
to my knowledge waterborne is a simple shake a few times and pour.

never seen a agitator on them.
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal

User avatar

No Turning Back
Posts: 599
Joined: Tue Aug 30, 2005 10:20 am
Location: Memphis, TN
PostPosted: Tue Jun 26, 2018 9:44 pm
AWX has agitators as does Spies. Should have been a stainless agitator lid though. Complain to your jobber. Demo some PPG Envirobase 8n there to build a fire under their butt lol. You'll never touch sw after that.

User avatar

Settled In
Posts: 91
Joined: Wed Feb 16, 2011 3:36 am
PostPosted: Mon Jul 02, 2018 9:49 am
Jobber offered to replace the inventory N/C.

Return to Body and Paint

Who is online

Users browsing this forum: Drew and 80 guests