Concept car build?
No Turning Back
Posts: 597
Joined: Fri Feb 03, 2017 7:36 am Country: USA |
Just adding a couple more pics of "fixing the hood". Also had to replace a big piece of inner structure, and after making the piece, my buddy Kenny, punched some flared holes in it, for extra cool-ness. Also added some 3/4 square tubing to reinforce the hood, as it was a bit "floppy", probably do to removing the hood bird, and the support rods that attached it to the hood sides.
|
Top Contributor
Posts: 6233
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
How did you form That Tapered Hump into your patch for the hood?
And When Did you contour the Patch to match the Hood before or after forming the Tapered Hump? Something tells me you formed the Hump first then wheeled it to match the Hood contour? At least that's how I would try to make it? Not so sure how you made the Tapered Hump though? Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
No Turning Back
Posts: 597
Joined: Fri Feb 03, 2017 7:36 am Country: USA |
Lucky for me, the tapered peak (he said 'hump' hahaha), was on a relatively flat part of the hood, so I did the peak first, using the offset die on a bead roller, then bent the curve in the front, shrunk it a bit, and finished in the Wheel. Just bending the front part I could put a small amount of curve at the very front of the peak to match the curvature of the hood.
|
My fabrication skills are only hindered by lack of knowledge, skill and the proper tools.
I truly appreciate the craftsmanship of those like yourself that produce such fine metal work. Chevman's '57 Chevy Nomad is still an amazing testament to what some can do. viewtopic.php?f=12&t=17047&hilit=57+chevy+Nomad I only dream of being able to shape, weld and work metal to the level y'all do. 1968 Coronet R/T
ACTS 16:31 |
|
Top Contributor
Posts: 6233
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Terminology ? Offset die in a Bead roller? Hmm now you got me thinking I know what you are talking about and a Bead roller is on my Want list of new tools for my own shop. Just not so sure how you got that much crown and shaped like that that's a real trick. I have played with many a Bead roller with different dies in many sheet metal shops that I have worked in a various Airlines and I have never seen anyone pull that off before. Now that I stop and think about it it gives me Lots of new ideas of what can be done with a the Bead roller, Its more than what it was designed to do BUT what you can do with it! Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Awesome build, LOVE the craftsmanship.
BTW, I am a Caddy guy and I think (my opinion) that your design is better looking than the Cadmad Ridler winner. Again, very nice and thanks for sharing. Sent by the random thoughts from the voices in my head...
|
|
No Turning Back
Posts: 597
Joined: Fri Feb 03, 2017 7:36 am Country: USA |
Wow! Now that's a compliment! Though I don't know if I deserve it. Thanks OldFatBald. The build isn't going to be nearly as detailed or super-engineered like the CadMad, but I still hope to make it unique and head turning.
|
Top Contributor
Posts: 6233
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Been a while any updates ?
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
No Turning Back
Posts: 597
Joined: Fri Feb 03, 2017 7:36 am Country: USA |
Hi, Dennis! Been working on it, mostly restoring the structure around the tailgate area. Bought a new tailgate skin, but that just showed me where more work was needed to get the jambs to fit right!!!!! Also been struggling with the transition seam between the Olds roof front section, and the Nomad roof. The Olds was about 3/4" wider, and grew more when we chopped it. So it had to be pulled in a bit, and the Nomad roof sliced and moved out a bit. Caused quite a bit of tension in that flat roof section! TIGed it all up, and had nothing but trouble trying to metal finish it. Finally, just this week, I built a hand held planishing hammer to help out, doesn't help that my left hand still hasn't recovered from my surgery 2 years ago. This has been a Godsend in smoothing out and stretching the weld seam. I'll put up pics when I can!
Thanks for the interest! Oh..and in the meantime, also collecting front end parts, engine stuff, powdercoating suspension pieces, converting the steering column to work with a late model box, etc, etc. |
No Turning Back
Posts: 597
Joined: Fri Feb 03, 2017 7:36 am Country: USA |
|
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: No registered users and 59 guests