Greetings Iam installing 6-1/2" speakers to the inside of my custom fairing.
The instructions say to just bolt through. I would like to open the hole to correct size and install speaker ring . I would like some advise and direct in epoxying or gluing the rings in to be strong enough to handle the speakers.
Any help would be greatly appreciated.
Attaching plastic speaker ring to fiberglass fairing
6 posts
• Page 1 of 1
"if you can't be good,
be good at it!" |
|
Do you know what the ring is made of?..... problem I see with this is....you will only get a mechanical adhesion at best with trying to glue, glass, epoxy, whatever. Soooo....the bolts are going to attach mechanically anyway. I mean the stuff will only act as possibly a stiffener/sealer at best. I just did a similar mount in 6061 aluminum used bolts only and did a closed cell speaker basket behind it that the speaker mounted "through" from the front. It is solid and the low/mid frequency response is very clean and not muddy.
Ohh, and I just noticed....that is not regular fiberglass. It is SMC which means Sheet Molded Compound. You can only use SMC compatible (usually means epoxy) glues and resins when working with it... Just an opinion.....that is another good reason to just bolt it down..... Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
Ok, I get what you are saying. I am pretty sure the ring is ABS. Another obsticale is unless I mount the speakers on the out side(bolt through) there is no way to cover with the grills. and when that stack up is added together there is not clearence. I am just worried about the vibration. I think this is going to take some pondering.
"if you can't be good,
be good at it!" |
|
Seems like it is always that way with audio installs. Some of my best laid plans went to crap when I fired my systems up. Yeah.....think it out..... and then if it is ABS it won't play well with most any other plastic.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
Try CA Glue and use the Activator - Easily available on Amazon
We use it to bond acrylic to acrylic to expanded PVC and to aluminum sheet If you needed to, you could just remake a new speaker ring out of acrylic, use that one as a template Sent by the random thoughts from the voices in my head...
|
|
Ooohhh.... that's pretty cool......
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
6 posts
• Page 1 of 1
Return to Fiberglass and Plastic
Who is online
Users browsing this forum: No registered users and 49 guests