Paint Activation Question
8 posts
• Page 1 of 1
Fully Engaged
Posts: 120
Joined: Sat Dec 19, 2009 10:24 am Location: Mansfield,Texas |
I have been using paint from a company out of Georgia. Their Basecoat requires a 1:1 mixture with Reducer plus an additional mixture of one ounce per quart of an activator. The company that I have been using has a very limited color selection. I have noticed good reviews of TAMCO products and am thinking of giving them a try. I noticed no mention of their basecoat needing an activator. Does anyone know if requires an activator? Wondering why some would require it and others not?
|
Depends on what type of paint you are using. Enamel, lacquer, urethane, etc.
For urethane base coats, which I believe most are today, activating is optional and not required. There are advantages to activating the base coat, so I for one always add activator. You can use clear coat activator in your base coat to activate it. I am sure one of the pros can give you a more detailed answer. 1968 Coronet R/T
ACTS 16:31 |
|
Top Contributor
Posts: 6217
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
I too use a Paint mfg out of GA by a small good products!
I add the Activator for the Clear I am gonna use to my Base coat all the time for what ever mfg I use, mainly Dupont/Axalta. I was told The main advantage was that it makes future repairs easier as it helps prevent edge mapping of the repaired area. I Also heard it helps with the chemical bond from the base coat to the clear coat. I am not a Chemical engineer so I can not confirm or deny any claims, I can say it hasn't hurt anything yet. Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
I use it in certain repairs, where I'm giving a long term warranty. Up to 5% hardener, same as that used in the clear, after mixing base to RTS or RFU. While Axalta won't deny warranty if hardener isn't used in the base, they certainly encourage it and it's detailed on the TDS for the better quality products.
At only 5% it doesn't make any appreciable difference to the base when spraying; sort of similar to adding a splash of slow thinner/reducer. The most obvious thing is that it reduces the tendency to chip, so ideal on front bars and bonnets. Chris
|
|
Here is the deal with activating your basecoat,
you create a 3 layer cross link. Urethane sealer Basecoat w/ hardener (I use whatever hardener is in my clear I'm going to use) 5% Clear coat This combo above will give you three layers cross linking together, Pros : No delamination, helps prevent clear getting moved or stamped assembling door handles etc, chip resistance. etc Cons : none these days I wouldn't call it optional, put it in your base. Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Top Contributor
Posts: 6217
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
I got a Good question if your mixing 1 to 1 base reducer in a 1 qt cup. 5% is how much?
My Cups dont have a 1 to 1 to 5% mix ratio, perhaps some do? I am I am sure if I am not sure others are wondering as well lol I was told just add a couple of Cap fulls to the mix would be fine? Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Top Contributor
Posts: 6735
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
So lets say we want to mix a quart ready to spray.
thats 16 oz base 16 oz reducer total 32 oz 10% would be 3.2 oz so half of that is 5% = 1.6 oz. activator. or 32oz x .05 the 5% = 1.6 oz Jay D. they say my name is Jay
|
Or you can simply us this formula:
(Oz Base+Oz Reducer) x .05 = amount of activator (16 + 16) = 32 x .05 =1.6 oz Activator (12 + 12) = 24 x .05 = 1.2 oz Activator 1968 Coronet R/T
ACTS 16:31 |
|
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 120 guests