hotstang's ProfileWhat caused this and how do I prevent this? The only way I know to fix this is sand and respray.
What caused this
13 posts
• Page 1 of 2 • 1, 2
 Posted: Fri Mar 17, 2023 4:23 pm
Not sure this shows up in the pictures but there is a definite color difference in parts of these panels. The trunk has a large section in the center and the door is lighter on the edge towards the quarter panel. Both panels I used a white sealer before base coat. The base was mixed within one hour of spraying and was stirred before adding reducer.
What caused this and how do I prevent this? The only way I know to fix this is sand and respray.
|
|
 Board Moderator
Posts: 9761
Joined: Fri Oct 20, 2006 12:40 pm Location: ARIZONA |
Posted: Fri Mar 17, 2023 6:25 pm
How many coats of base did you apply?
Lighter colors often take more coats to get full coverage or what I call True Color. My standard practice with darker colors is 3 coats of base even though the product I use covers well with just two coats. 1968 Coronet R/T
ACTS 16:31 |
|
Posted: Fri Mar 17, 2023 7:27 pm
I used PPG Omni+. Applied 3 full coats (thought 2 coats were a little thin)
|
|
Board Moderator
Posts: 9761
Joined: Fri Oct 20, 2006 12:40 pm Location: ARIZONA |
Posted: Fri Mar 17, 2023 9:25 pm
I am not a fan of Omni paint, used it once and that was enough for me.
If two coats looked thin, then three probably wasn't enough to get the coverage necessary. Hopefully, some others will offer their thoughts on this as well. 1968 Coronet R/T
ACTS 16:31 |
Top Contributor
Posts: 6602
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
Posted: Fri Mar 17, 2023 10:33 pm
yep, probably not enough coats. some yellows are really translucent and don't cover well and cheap products magnify this.
Jay D. they say my name is Jay
|
 Top Contributor
Posts: 3943
Joined: Wed Sep 07, 2005 9:59 am Location: Louisville, KY Country: USA |
Posted: Sat Mar 18, 2023 8:17 am
Take it outside to make sure it's not a reflection,
also, did you allow plenty of flash time before clearing it? Sometimes the clear can mess with the base if the base isn't dry enough. (just thinking out loud) could very well be not enough coats or applied to wet. JC.
(It's not custom painting-it's custom sanding) |
E-mail JCCLARK
JCCLARK's Website
Top Contributor
Posts: 6602
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
Posted: Sat Mar 18, 2023 11:47 am
 Jay D. they say my name is Jay
|
|
Posted: Sat Mar 18, 2023 11:58 am
Thanks for the quick replies. I will pull it in the Sun but am pretty sure it isn’t a reflection. The other 2 panels I painted have a consistent color so I am still scratching my head. Just hate to redo when so much time and $ invested.
What base would you use instead of Omni+? |
|
Board Moderator
Posts: 9761
Joined: Fri Oct 20, 2006 12:40 pm Location: ARIZONA |
Posted: Sat Mar 18, 2023 3:36 pm
You will get varied responses to this because there are a number of quality products.
I personally like Automotive Art's Motobase LV base coat. It mixes 1:1, sprays and covers great. The pricing is reasonable with shipping to my door in Arizona: I purchase it from here: https://www.autorodtechnologies.com/cha ... -and-audio Chad's Paint Supply 13477 California Rd. New Troy, MI 49119 Phone: 269-426-6000 Give them the paint code information and ask for a quote including shipping to your address. 1968 Coronet R/T
ACTS 16:31 |
Top Contributor
Posts: 6602
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
Posted: Sat Mar 18, 2023 6:02 pm
 notice i declined to answer that question. all most any brand suggested some else won't like it. Jay D. they say my name is Jay
|
13 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: Google Adsense [Bot] and 52 guests
The team
Delete all board cookies• All times are UTC - 6 hours [ DST ]Powered by phpBB© 2000, 2002, 2005, 2007 phpBB Group
Advertisements by Advertisement Management