I painted my bug few years ago but added some gold (flakes) ghost flames to the front last year, and it does not look bad when the car is cleaned
I'll post some pics of the flame job when I have the time to...
Cheers,
Leo
67' cal-look bug
8 posts
• Page 1 of 1
67' cal-look bug, 2020cc
63' vespa |
|
Clean axx bug! Bug.
What materials did you use? And can we get shots of the interior? Hm... Nice! A man can do all things if he but wills them.
|
|
nice bug, need a narrowed beam and
drop you **** end down Burnt, scarred, bloodied & greasie hands... it's a zen thing.
Airkooled Kustoms |
|
Thanks Han and Spook,
No narrowed beam for now but I'm waiting for some gasburner wheels which have that cool ET35 offset (vs ET15 for these).. I used 2k primer (PPG) and the paint is Dupont single stage "Tornado red". The front hood and fenders where wetsanded using 600grit paper to lay the flames out, then top coated with a MS PPG clear.. 5 coats of clear where necessary to burry the flakes, sanding after 3rd coat and then adding 2 last wet coat of clear, with a "flow coat". Then the hood and front fenders were color sanded going from 1000 to 2000, and buffed using the whool pad first then the foam pad. Here are some pics of the interior: Engine (120hp 2 liter typ1, home made): Doing a convertible decklid at the mo', the one I have is in "good" shape but I painted it quickly knowing I would replace it soon.. And the flame job (it was my 1st one BTW ), the flame design is not very good but..: Still LOTS of things to do on this bug.. Cheers, Leo 67' cal-look bug, 2020cc
63' vespa |
|
Like the paint work and really digging the wheels.
I like wheels that you don't see everybody and his brother riding on. Mike
Don't Listen To Me I Don't Know What I'm Doing |
|
Ha! I didn't even notice the flames. From the pictures, it looks
like a perfect ghost flame job. VERY nicely done. How many coats of "flake" did you spray and how was it mixed? A man can do all things if he but wills them.
|
|
No Turning Back
Posts: 580
Joined: Wed Apr 11, 2007 11:35 pm Location: Phoenix Arizona |
Bug looks very good. I would go down one or two splines in rear ride height
|
Thanks guys
Taller tires are in the garage waiting to take place at the rear, looking for a rake here And I hate to mess with the rear torsion leaves.. Thanks Han, I sprayed one light coat of clear with flakes (about 5% flakes I think), mostly to make the shading and then I added more flakes to make the tips and the curves pop out a bit more, I think I put more than 3 times the amount of flakes so I'd say something near 10 to 15% of flakes for the 2nd (last) coat.. I did not write anything that was pretty stupid.. now I do I had to spray 3 coats of clear then I wetsanded to flatten the flames, then again 2 wet coats of clear. Then I took the 1000 grit paper and started the colorsanding process going to 2000 and buffing. So much masking and sanding... lol Cheers, Leo 67' cal-look bug, 2020cc
63' vespa |
|
8 posts
• Page 1 of 1
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: Google [Bot] and 87 guests